User Guide

This is the user guide for the SSB PyPI Template, a Python template based on the Hypermodern Python article series. It is a fork of Hypermodern Python Cookiecutter and adopted for use in Statistics Norway.

If you’re in a hurry, check out the quickstart guide and the tutorials.

Introduction

About this project

The SSB PyPI Template is a general-purpose template for Python libraries and applications, released under the MIT license and hosted on GitHub.

The main objective of this project template is to enable current best practices through modern Python tooling. Our goals are to:

  • focus on simplicity and minimalism,

  • promote code quality through automation, and

  • provide reliable and repeatable processes,

all the way from local testing to publishing releases.

Projects are created from the template using Cookiecutter, a project scaffolding tool built on top of the Jinja template engine.

The project template is centered around the following tools:

  • Poetry for packaging and dependency management

  • Nox for automation of checks and other development tasks

  • GitHub Actions for continuous integration and delivery

Features

Here is a detailed list of features for this Python template:

The template supports Python 3.10, 3.10 and 3.12.

Version policy

The SSB PyPI Template uses Calendar Versioning with a YYYY.MM.DD versioning scheme.

The current stable release is 2024.9.10.

Installation

System requirements

You need a recent Windows, Linux, Unix, or Mac system with git installed.

Note

When working with this template on Windows, configure your text editor or IDE to use only UNIX-style line endings (line feeds).

The project template contains a .gitattributes file which enables end-of-line normalization for your entire working tree. Additionally, the Prettier code formatter converts line endings to line feeds. Windows-style line endings (CRLF) should therefore never make it into your Git repository.

Nonetheless, configuring your editor for line feeds is recommended to avoid complaints from the pre-commit hook for Prettier.

Getting Python (Windows)

If you’re on Windows, download the recommended installer for the latest stable release of Python from the official Python website. Before clicking Install now, enable the option to add Python to your PATH environment variable.

Verify your installation by checking the output of the following commands in a new terminal window:

python -VV
py -VV

Both of these commands should display the latest Python version, 3.10.

For local testing with multiple Python versions, repeat these steps for the latest bugfix releases of Python 3.10+, with the following changes:

  • Do not enable the option to add Python to the PATH environment variable.

  • py -VV and python -VV should still display the version of the latest stable release.

  • py -X.Y -VV (e.g. py -3.12 -VV) should display the exact version you just installed.

Note that binary installers are not provided for security releases.

Getting Python (Mac, Linux, Unix)

If you’re on a Mac, Linux, or Unix system, use pyenv for installing and managing Python versions. Please refer to the documentation of this project for detailed installation and usage instructions. (The following instructions assume that your system already has bash and curl installed.)

Install pyenv like this:

curl https://pyenv.run | bash

Add the following lines to your ~/.bashrc:

export PATH="$HOME/.pyenv/bin:$PATH"
eval "$(pyenv init -)"
eval "$(pyenv virtualenv-init -)"

Install the Python build dependencies for your platform, using one of the commands listed in the official instructions.

Install the latest point release of every supported Python version. This project template supports Python 3.10, 3.11 and 3.12.

pyenv install 3.10.13
pyenv install 3.11.6
pyenv install 3.12.2

After creating your project (see below), you can make these Python versions accessible in the project directory, using the following command:

pyenv local 3.11.6 3.10.13 3.12.2

The first version listed is the one used when you type plain python. Every version can be used by invoking python<major.minor>. For example, use python3.10 to invoke Python 3.10.

Requirements

Note

It is recommended to use pipx to install Python tools which are not specific to a single project. Please refer to the official documentation for detailed installation and usage instructions. If you decide to skip pipx installation, use pip install with the --user option instead.

You need four tools to use this template:

  • Cruft to create projects from the template,

  • Poetry to manage packaging and dependencies

  • Nox to automate checks and other tasks

  • nox-poetry for using Poetry in Nox sessions

Install Cruft using pipx:

pipx install cruft[pyproject]

Install Poetry using pipx:

pipx install poetry

Install Nox and nox-poetry using pipx:

pipx install nox
pipx inject nox nox-poetry

Remember to upgrade these tools regularly:

pipx upgrade cruft
pipx upgrade --include-injected nox
pipx upgrade poetry

Project creation

Creating a project

Create a project from this template by pointing Cruft to its GitHub repository. Use the --checkout option with the current stable release:

cruft create https://github.com/statisticsnorway/ssb-pypitemplate.git --checkout=2024.9.10

Cruft downloads the template, and asks you a series of questions about project variables, for example, how you wish your project to be named. When you have answered these questions, your project is generated in the current directory, using a subdirectory with the same name as your project.

Here is a complete list of the project variables defined by this template:

Project variables

Variable

Description

Example

project_name

Project name on PyPI and GitHub repo name

ssb-library

package_name

Import name of the package

ssb_library

friendly_name

Friendly project name

SSB Library

copyright_owner

Copyright owner

Statistics Norway

copyright_year

The project copyright year

2023

author

Name of the contact person

Ola Nordmann

email

E-mail address of the contact person

ola.nordmann@ssb.no

github_organization

GitHub organization or GitHub username of the author

statisticsnorway

version

Initial project version

0.0.0

license

The project license

MIT

development_status

Development status of the project

Development Status :: 4 - Beta

code_quality_level

Requirements for code quality level

Medium

Note

The initial project version should be the latest release on PyPI, or 0.0.0 for an unreleased package. See The Release workflow for details.

Your choices are recorded in the file .cookiecutter.json in the generated project, together with the URL of this Cookiecutter template. Having this JSON file in the project makes it possible later on to update your project with changes from the Cookiecutter template, using tools such as cruft.

In the remainder of this guide, <project> and <package> are used to refer to the project and package names, respectively. By default, their only difference is that the project name uses hyphens (kebab case), whereas the package name uses underscores (snake case).

Uploading to GitHub

This project template is designed for use with GitHub. After generating the project, your next steps are to create a Git repository and upload it to GitHub.

Change to the root directory of your new project, initialize a Git repository, and create a commit for the initial project structure. In the commands below, replace <project> by the name of your project.

cd <project>
git init
git add .
git commit

Use the following command to ensure your default branch is called main, which is the default branch name for GitHub repositories.

git branch --move --force main

Create an empty repository on GitHub, using the project name you chose when you generated the project.

Note

Do not include a README.md, LICENSE, or .gitignore. These files are provided by the project template.

Finally, upload your repository to GitHub. In the commands below, replace <username> by your GitHub username, and <project> by the name of your project.

git remote add origin git@github.com:<username>/<project>.git
git push --set-upstream origin main

Now may be a good time to set up Continuous Integration for your repository. Refer to the section External services for detailed instructions.

Project overview

Files and directories

This section provides an overview of all the files generated for your project.

Let’s start with the directory layout:

Directories

src/<package>

Python package

tests

Test suite

docs

Documentation

.github/workflows

GitHub Actions workflows

The Python package is located in the src/<package> directory. For more details on these files, refer to the section The initial package.

Python package

src/<project>/py.typed

Marker file for PEP 561

src/<project>/__init__.py

Package initialization

src/<project>/__main__.py

Command-line interface

src/<project>/functions.py

Library functions example

The test suite is located in the tests directory. For more details on these files, refer to the section The test suite.

Test suite

tests/__init__.py

Test package initialization

tests/test_main.py

Test cases for __main__

tests/test_functions.py

Test cases for functions.py

The project documentation is written in Markdown. The documentation files in the top-level directory are rendered on GitHub:

Documentation files (top-level)

README.md

Project description for GitHub and PyPI

CONTRIBUTING.md

Contributor Guide

CODE_OF_CONDUCT.md

Code of Conduct

LICENSE

License

The files in the docs directory are built using Sphinx and MyST. The Sphinx documentation is hosted on Read the Docs:

Documentation files (Sphinx)

index.md

Main document

contributing.md

Contributor Guide (via include)

codeofconduct.md

Code of Conduct (via include)

license.md

License (via include)

reference.md

API reference

usage.md

Command-line reference

The .github/workflows directory contains the GitHub Actions workflows:

GitHub Actions workflows

release.yml

The Release workflow

tests.yml

The Tests workflow

labeler.yml

The Labeler workflow

The project contains many configuration files for developer tools. Most of these are located in the top-level directory. The table below lists these files, and links each file to a section with more details.

Configuration files

.cookiecutter.json

Project variables

.darglint

Configuration for darglint

.github/dependabot.yml

Configuration for Dependabot

.gitattributes

Git attributes

.gitignore

Git ignore file

.github/release-drafter.yml

Configuration for Release Drafter

.github/labels.yml

Configuration for GitHub Labeler

.pre-commit-config.yaml

Configuration for pre-commit

docs/conf.py

Configuration for Sphinx

noxfile.py

Configuration for Nox

pyproject.toml

Configuration for Poetry, Coverage.py, isort, and mypy

sonar-project.properties

Configuration for SonarCloud

The pyproject.toml file is described in more detail below.

Dependencies are managed by Poetry and declared in the pyproject.toml file. The table below lists some additional files with pinned dependencies. Follow the links for more details on these.

Dependency files

poetry.lock

Poetry lock file

.github/workflows/constraints.txt

Constraints file for GitHub Actions workflows

The initial package

You can find the initial Python package in your generated project under the src directory:

src
└── <package>
    ├── __init__.py
    ├── __main__.py
    ├── functions.py
    └── py.typed
__init__.py

This file declares the directory as a Python package, and contains any package initialization code.

__main__.py

The __main__ module defines the entry point for the command-line interface. The command-line interface is implemented using the Click library, and supports --help and --version options. When the package is installed, a script named <project> is placed in the Python installation or virtual environment. This allows you to invoke the command-line interface using only the project name:

poetry run <project>  # during development
<project>             # after installation

The command-line interface can also be invoked by specifying a Python interpreter and the package name:

python -m <package> [<options>]
functions.py

This file declares library functions, just as an example.

py.typed

This is an empty marker file, which declares that your package supports typing and is distributed with its own type information (PEP 561). This allows people using your package to type-check their Python code against it.

The test suite

Tests are written using the pytest testing framework, the de facto standard for testing in Python.

The test suite is located in the tests directory:

tests
├── __init__.py
├── test_functions.py
└── test_main.py

The test suite is declared as a package, and mirrors the source layout of the package under test. The file test_main.py contains tests for the __main__ module.

Initially, the test suite contains a single test case, checking whether the program exits with a status code of zero. It also provides a test fixture using click.testing.CliRunner, a helper class for invoking the program from within tests.

The file test_functions.py contains tests for the functions module.

For details on how to run the test suite, refer to the section The tests session.

Documentation

The project documentation is written in Markdown and processed by the Sphinx documentation engine using the MyST extension.

The top-level directory contains several stand-alone documentation files:

README.md

This file is your main project page and displayed on GitHub and PyPI.

CONTRIBUTING.md

The Contributor Guide explains how other people can contribute to your project.

CODE_OF_CONDUCT.md

The Code of Conduct outlines the behavior expected from participants of your project. It is adapted from the Contributor Covenant, version 2.1.

LICENSE.md

This file contains the text of your project’s license.

Note

The files above are also rendered on GitHub and PyPI. Keep them in plain Markdown, without MyST syntax extensions.

The documentation files in the docs directory are built using Sphinx and MyST:

index.md

This is the main documentation page. It includes the project description from README.md. This file also defines the navigation menu, with links to other documentation pages. The Changelog menu entry links to the GitHub Releases page of your project.

contributing.md

This file includes the Contributor Guide from CONTRIBUTING.md.

codeofconduct.md

This file includes the Code of Conduct from CODE_OF_CONDUCT.md.

license.md

This file includes the license from LICENSE.md.

reference.md

The API reference for your project. It is generated from docstrings and type annotations in the source code, using the autodoc and napoleon extensions.

usage.md

The command-line reference for your project. It is generated by inspecting the click entry-point in your package, using the sphinx-click extension.

The docs directory contains two more files:

conf.py

This Python file contains the Sphinx configuration.

The project documentation is built and hosted on [GitHub Pages], and uses the furo Sphinx theme.

You can also build the documentation locally using Nox, see The docs session.

Packaging

The pyproject.toml file

The configuration file for the Python package is located in the root directory of the project, and named pyproject.toml. It uses the TOML configuration file format, and contains two sections—tables in TOML parlance—, specified in PEP 517 and 518:

  • The build-system table declares the requirements and the entry point used to build a distribution package for the project. This template uses Poetry as the build system.

  • The tool table contains sub-tables where tools can store configuration under their PyPI name.

Tool configurations in pyproject.toml

tool.coverage

Configuration for Coverage.py

tool.isort

Configuration for isort

tool.mypy

Configuration for mypy

tool.poetry

Configuration for Poetry

The tool.poetry table contains the metadata for your package, such as its name, version, and authors, as well as the list of dependencies for the package. Please refer to the Poetry documentation for a detailed description of each configuration key.

Version constraints

TL;DR

This project template omits upper bounds from all version constraints.

You are encouraged to manually remove upper bounds for dependencies you add to your project using Poetry:

  1. Replace ^1.2.3 with >=1.2.3 in pyproject.toml

  2. Run poetry lock --no-update to update poetry.lock

Version constraints express which versions of dependencies are compatible with your project. In the case of core dependencies, they are also a part of distribution packages, and as such affect end-users of your package.

Note

Dependencies are Python packages used by your project, and they come in two types:

  • Core dependencies are required by users running your code, and typically consist of third-party libraries imported by your package. When your package is distributed, the package metadata includes these dependencies, allowing tools like pip to automatically install them alongside your package.

  • Development dependencies are only required by developers working on your code. Examples are applications used to run tests, check code for style and correctness, or to build documentation. These dependencies are not a part of distribution packages, because users do not require them to run your code.

For every dependency added to your project, Poetry writes a version constraint to pyproject.toml. Dependencies are kept in two TOML tables:

  • tool.poetry.dependencies—for core dependencies

  • tool.poetry.group.dev.dependencies—for development dependencies

By default, version constraints added by Poetry have both a lower and an upper bound:

  • The lower bound requires users of your package to have at least the version that was current when you added the dependency.

  • The upper bound allows users to upgrade to newer releases of dependencies, as long as the version number does not indicate a breaking change.

According to the Semantic Versioning standard, only major releases may contain breaking changes, once a project has reached version 1.0.0. A major release is one that increments the major version (the first component of the version identifier). An example for such a version constraint would be ^1.2.3, which is a Poetry-specific shorthand equivalent to >= 1.2.3, < 2.

This project template omits upper bounds from all version constraints, in a conscious departure from Poetry’s defaults. There are two separate reasons for removing version caps, one principled, the other pragmatic:

  1. Version caps lead to problems in the Python ecosystem due to its flat dependency management.

  2. Version caps lead to frequent merge conflicts between dependency updates.

The first point is treated in detail in the following articles:

The second point is ultimately due to the fact that every updated version constraint changes a hashsum in the poetry.lock file. This means that PRs updating version constraints will always conflict with each other.

Note

The problem with merge conflicts is greatly exacerbated by a Dependabot issue: Dependabot updates version constraints in pyproject.toml even when the version constraint already covered the new version. This can be avoided using a configuration setting where only the lock file is ever updated, not the version constraints. Omitting version caps makes the lockfile-only strategy a viable alternative.

Poetry will still add ^1.2.3-style version constraints whenever you add a dependency. You should edit the version constraint in pyproject.toml, replacing ^1.2.3 with >=1.2.3 to remove the upper bound. Then update the lock file by invoking poetry lock --no-update.

The lock file

Poetry records the exact version of each direct and indirect dependency in its lock file, named poetry.lock and located in the root directory of the project. The lock file does not affect users of the package, because its contents are not included in distribution packages.

The lock file is useful for a number of reasons:

  • It ensures that local checks run in the same environment as on the CI server, making the CI predictable and deterministic.

  • When collaborating with other developers, it allows everybody to use the same development environment.

  • When deploying an application, the lock file helps you keep production and development environments as similar as possible (dev-prod parity).

For these reasons, the lock file should be kept under source control.

Dependencies

This project template has a core dependency on Click, a library for creating command-line interfaces. The template also comes with various development dependencies. See the table below for an overview of the dependencies of generated projects:

Dependencies

black

The uncompromising code formatter.

click

Composable command line interface toolkit

coverage

Code coverage measurement for Python

darglint

A utility for ensuring Google-style docstrings stay up to date with the source code.

furo

A clean customisable Sphinx documentation theme.

isort

A Python utility / library to sort Python imports.

mypy

Optional static typing for Python

pre-commit

A framework for managing and maintaining multi-language pre-commit hooks.

pre-commit-hooks

Some out-of-the-box hooks for pre-commit.

pygments

Pygments is a syntax highlighting package written in Python.

pytest

pytest: simple powerful testing with Python

ruff

A fast python linter, replacing several other tools.

safety

Checks installed dependencies for known vulnerabilities.

sphinx

Python documentation generator

sphinx-autobuild

Rebuild Sphinx documentation on changes, with live-reload in the browser.

sphinx-click

Sphinx extension that automatically documents click applications

typeguard

Run-time type checker for Python

xdoctest

A rewrite of the builtin doctest module

Using Poetry

Poetry manages packaging and dependencies for Python projects.

Managing dependencies

Use the command poetry show to see the full list of direct and indirect dependencies of your package:

poetry show

Use the command poetry add to add a dependency for your package:

poetry add foobar         # for core dependencies
poetry add -G dev foobar  # for development dependencies

Important

It is recommended to remove the upper bound from the version constraint added by Poetry:

  1. Edit pyproject.toml to replace ^1.2.3 with >=1.2.3 in the dependency entry

  2. Update poetry.lock using the command poetry lock --no-update

See Version constraints for more details.

Use the command poetry remove to remove a dependency from your package:

poetry remove foobar

Use the command poetry update to upgrade the dependency to a new release:

poetry update foobar

Note

Dependencies in the SSB PyPI Template are managed by Dependabot. When newer versions of dependencies become available, Dependabot updates the poetry.lock file and submits a pull request.

Installing the package for development

Poetry manages a virtual environment for your project, which contains your package, its core dependencies, and the development dependencies. All dependencies are kept at the versions specified by the lock file.

Note

A virtual environment gives your project an isolated runtime environment, consisting of a specific Python version and an independent set of installed Python packages. This way, the dependencies of your current project do not interfere with the system-wide Python installation, or other projects you’re working on.

You can install your package and its dependencies into Poetry’s virtual environment using the command poetry install.

poetry install

This command performs a so-called editable install of your package: Instead of building and installing a distribution package, it creates a special .egg-link file that links to your local source code. This means that code edits are directly visible in the environment without the need to reinstall your package.

Installing your package implicitly creates the virtual environment if it does not exist yet, using the currently active Python interpreter, or the first one found which satisfies the Python versions supported by your project.

Managing environments

You can create environments explicitly with the poetry env command, specifying the desired Python version. This allows you to create an environment for every Python version supported by your project, and easily switch between them:

poetry env use 3.10
poetry env use 3.11
poetry env use 3.12

Only one Poetry environment can be active at any time. Note that 3.12 comes last, to ensure that the current Python release is the active environment. Install your package with poetry install into each environment after creating it.

Use the command poetry env list to list the available environments:

poetry env list

Use the command poetry env remove to remove an environment:

poetry env remove <version>

Use the command poetry env info to show information about the active environment:

poetry env info

Running commands

You can run an interactive Python session inside the active environment using the command poetry run:

poetry run python

The same command allows you to invoke the command-line interface of your project:

poetry run <project>

You can also run developer tools, such as pytest:

poetry run pytest

While it is handy to have developer tools available in the Poetry environment, it is usually recommended to run these using Nox, as described in the section Using Nox.

Building and distributing the package

Note

With the SSB PyPI Template, building and distributing your package is taken care of by GitHub Actions. For more information, see the section The Release workflow.

This section gives a short overview of how you can build and distribute your package from the command line, using the following Poetry commands:

poetry build
poetry publish

Building the package is done with the python build command, which generates distribution packages in the dist directory of your project. These are compressed archives that an end-user can download and install on their system. They come in two flavours: source (or sdist) archives, and binary packages in the wheel format.

Publishing the package is done with the python publish command, which uploads the distribution packages to your account on PyPI, the official Python package registry.

Installing the package

Once your package is on PyPI, others can install it with pip, pipx, or Poetry:

pip install <project>
pipx install <project>
poetry add <project>

While pip is the workhorse of the Python packaging ecosystem, you should use higher-level tools to install your package:

  • If the package is an application, install it with pipx.

  • If the package is a library, install it with poetry add in other projects.

The primary benefit of these installation methods is that your package is installed into an isolated environment, without polluting the system environment, or the environments of other applications. This way, applications can use specific versions of their direct and indirect dependencies, without getting in each other’s way.

If the other project is not managed by Poetry, use whatever package manager the other project uses. You can always install your project into a virtual environment with plain pip.

Using Nox

Nox automates testing in multiple Python environments. Like its older sibling tox, Nox makes it easy to run any kind of job in an isolated environment, with only those dependencies installed that the job needs.

Nox sessions are defined in a Python file named noxfile.py and located in the project directory. They consist of a virtual environment and a set of commands to run in that environment.

While Poetry environments allow you to interact with your package during development, Nox environments are used to run developer tools in a reliable and repeatable way across Python versions.

Most sessions are run with every supported Python version. Other sessions are only run with the current stable Python version, for example the session used to build the documentation.

Running sessions

If you invoke Nox by itself, it will run the full test suite:

nox

This includes tests, linters, type checks, and more. For the full list, please refer to the table below.

The list of sessions run by default can be configured by editing nox.options.sessions in noxfile.py. Currently the list only excludes the docs session (which spawns an HTTP server) and the coverage session (which is triggered by the tests session).

You can also run a specific Nox session, using the --session option. For example, build the documentation like this:

nox --session=docs

Print a list of the available Nox sessions using the --list-sessions option:

nox --list-sessions

Nox creates virtual environments from scratch on each invocation. You can speed things up by passing the –reuse-existing-virtualenvs option, or the equivalent short option -r. For example, the following may be more practical during development (this will only run tests and type checks, on the current Python release):

nox -p 3.11 -rs tests mypy

Many sessions accept additional options after -- separator. For example, the following command runs a specific test module:

nox --session=tests -- tests/test_main.py

Overview of Nox sessions

The following table gives an overview of the available Nox sessions:

Nox sessions

Session

Description

Python

Default

coverage

Report coverage with Coverage.py

3.10

(✓)

docs

Build and serve Sphinx documentation

3.10

docs-build

Build Sphinx documentation

3.10

mypy

Type-check with mypy

3.103.12

pre-commit

Lint with pre-commit

3.10

tests

Run tests with pytest

3.103.12

typeguard

Type-check with Typeguard

3.10

xdoctest

Run examples with xdoctest

3.103.12

The docs session

Build the documentation using the Nox session docs:

nox --session=docs

The docs session runs the command sphinx-autobuild to generate the HTML documentation from the Sphinx directory. This tool has several advantages over sphinx-build when you are editing the documentation files:

  • It rebuilds the documentation whenever a change is detected.

  • It spins up a web server with live reloading.

  • It opens the location of the web server in your browser.

Use the -- separator to pass additional options. For example, to treat warnings as errors and run in nit-picky mode:

nox --session=docs -- -W -n docs docs/_build

This Nox session always runs with the current major release of Python.

The docs-build session

The docs-build session runs the command sphinx-build to generate the HTML documentation from the Sphinx directory.

This session is meant to be run as a part of automated checks. Use the interactive docs session instead while you’re editing the documentation.

This Nox session always runs with the current major release of Python.

The mypy session

mypy is the pioneer and de facto reference implementation of static type checking in Python. Learn more about it in the section Type-checking with mypy.

Run mypy using Nox:

nox --session=mypy

You can also run the type checker with a specific Python version. For example, the following command runs mypy using the current stable release of Python:

nox --session=mypy --python=3.11

Use the separator -- to pass additional options and arguments to mypy. For example, the following command type-checks only the __main__ module:

nox --session=mypy -- src/<package>/__main__.py

The pre-commit session

pre-commit is a multi-language linter framework and a Git hook manager. Learn more about it in the section Linting with pre-commit.

Run pre-commit from Nox using the pre-commit session:

nox --session=pre-commit

This session always runs with the current stable release of Python.

Use the separator -- to pass additional options to pre-commit. For example, the following command installs the pre-commit hooks, so they run automatically on every commit you make:

nox --session=pre-commit -- install

The safety session

Safety checks the dependencies of your project for known security vulnerabilities, using a curated database of insecure Python packages. The SSB PyPI Template uses the poetry export command to convert Poetry’s lock file to a requirements file, for consumption by Safety.

Run Safety using the safety session:

nox --session=safety

This session always runs with the current stable release of Python.

The tests session

Tests are written using the pytest testing framework. Learn more about it in the section The test suite.

Run the test suite using the Nox session tests:

nox --session=tests

The tests session runs the test suite against the installed code. More specifically, the session builds a wheel from your project and installs it into the Nox environment, with dependencies pinned as specified by Poetry’s lock file.

You can also run the test suite with a specific Python version. For example, the following command runs the test suite using the current stable release of Python:

nox --session=tests --python=3.11

Use the separator -- to pass additional options to pytest. For example, the following command runs only the test case test_main_succeeds:

nox --session=tests -- -k test_main_succeeds

The tests session also installs pygments, a Python syntax highlighter. It is used by pytest to highlight code in tracebacks, improving the readability of test failures.

The coverage session

Note

Test coverage is a measure of the degree to which the source code of your program is executed while running its test suite.

The coverage session prints a detailed coverage report to the terminal, combining the coverage data collected during the tests session. If the total coverage is below 100%, the coverage session fails. Code coverage is measured using Coverage.py.

The coverage session is triggered by the tests session, and runs after all other sessions have completed. This allows it to combine the coverage data for different Python versions.

You can also run the session manually:

nox --session=coverage

Use the -- separator to pass arguments to the coverage command. For example, here’s how you would generate an HTML report in the htmlcov directory:

nox -rs coverage -- html

Coverage.py is configured in the pyproject.toml file, using the tool.coverage table. The configuration informs the tool about your package name and source tree layout. It also enables branch analysis and the display of line numbers for missing coverage, and specifies the target coverage percentage. Coverage is measured for the package as well as the test suite itself.

During continuous integration, coverage data is uploaded to the SonarCloud reporting service. For details, see the sections about SonarCloud and The Tests workflow.

The typeguard session

Typeguard is a runtime type checker and pytest plugin. It can type-check function calls during test runs via an import hook.

Typeguard checks that arguments passed to functions match the type annotations of the function parameters, and that the return value provided by the function matches the return type annotation. In the case of generator functions, Typeguard checks the yields, sends and the return value against the Generator annotation.

Run Typeguard using Nox:

nox --session=typeguard

The typeguard session runs the test suite with runtime type-checking enabled. It is similar to the tests session, with the difference that your package is instrumented by Typeguard.

This session always runs with the current stable release of Python.

Use the separator -- to pass additional options and arguments to pytest. For example, the following command runs only tests for the __main__ module:

nox --session=typeguard -- tests/test_main.py

Note

Typeguard generates a warning about missing type annotations for a Click object. This is due to the fact that __main__.main is wrapped by a decorator, and its type annotations only apply to the inner function, not the resulting object as seen by the test suite.

The xdoctest session

The xdoctest tool runs examples in your docstrings and compares the actual output to the expected output as per the docstring. This serves multiple purposes:

  • The example is checked for correctness.

  • You ensure that the documentation is up-to-date.

  • Your codebase gets additional test coverage for free.

Run the tool using the Nox session xdoctest:

nox --session=xdoctest

You can also run the test suite with a specific Python version. For example, the following command runs the examples using the current stable release of Python:

nox --session=xdoctest --python=3.11

By default, the Nox session uses the all subcommand to run all examples. You can also list examples using the list subcommand, or run specific examples:

nox --session=xdoctest -- list

Linting with pre-commit

pre-commit is a multi-language linter framework and a Git hook manager. It allows you to integrate linters and formatters into your Git workflow, even when written in a language other than Python.

pre-commit is configured using the file .pre-commit-config.yaml in the project directory. Please refer to the official documentation for details about the configuration file.

Running pre-commit from Nox

pre-commit runs in a Nox session every time you invoke nox:

nox

Run the pre-commit session explicitly like this:

nox --session=pre-commit

The session is described in more detail in the section The pre-commit session.

Running pre-commit from git

When installed as a Git hook, pre-commit runs automatically every time you invoke git commit. The commit is aborted if any check fails. When invoked in this mode, pre-commit only runs on files staged for the commit.

Install pre-commit as a Git hook by running the following command:

nox --session=pre-commit -- install

Managing hooks with pre-commit

Hooks in languages other than Python, such as prettier, run in isolated environments managed by pre-commit. To upgrade these hooks, use the autoupdate command:

nox --session=pre-commit -- autoupdate

Python-language hooks

Note

This section provides some background information about how this project template integrates pre-commit with Poetry and Nox. You can safely skip this section.

Python-language hooks in the SSB PyPI Template are not managed by pre-commit. Instead, they are tracked as development dependencies in Poetry, and installed into the Nox session alongside pre-commit itself. As development dependencies, they are also present in the Poetry environment.

This approach has some advantages:

  • All project dependencies are managed by Poetry.

  • Hooks receive automatic upgrades from Dependabot.

  • Nox can serve as a single entry point for all checks.

  • Additional hook dependencies can be upgraded by a dependency manager. An example for this are Flake8 extensions. By contrast, pre-commit autoupdate does not include additional dependencies.

  • Dependencies of dependencies (subdependencies) can be locked automatically, making checks more repeatable and deterministic.

  • Linters and formatters are available in the Poetry environment, which is useful for editor integration.

There are also some drawbacks to this technique:

  • This is not the officially supported way to integrate pre-commit hooks.

  • The hook scripts installed by pre-commit do not activate the virtual environment in which pre-commit and the hooks are installed. To work around this limitation, the Nox session patches hook scripts on installation.

  • Adding a hook is more work, including updating pyproject.toml and noxfile.py, and adding the hook definition to pre-commit-config.yaml.

You can always opt out of this integration method, by removing the repo: local section from the configuration file, and adding the official pre-commit hooks instead. Don’t forget to remove the hooks from Poetry’s dependencies and from the Nox session.

Note

Python-language hooks in the SSB PyPI Template are defined as system hooks. System hooks don’t have their environments managed by pre-commit; instead, pre-commit assumes that hook dependencies have already been installed and are available in its environment. The Nox session for pre-commit takes care of installing the Python hooks alongside pre-commit.

Furthermore, the SSB PyPI Template defines Python-language hooks as repository-local hooks. As such, hook definitions are not supplied by the hook repositories, but by the project itself. This makes it possible to override the hook language to system, as explained above.

Adding an official pre-commit hook

Adding the official pre-commit hook for a linter is straightforward. Often you can simply copy a configuration snippet from the repository’s README. Otherwise, note the hook identifier from the pre-commit-hooks.yaml file, and the git tag for the latest version. Add the following section to your pre-commit-config.yaml, under repos:

- repo: <hook repository>
  rev: <version tag>
  hooks:
    - id: <hook identifier>

While this technique also works for Python-language hooks, it is recommended to integrate Python hooks with Nox and Poetry, as shown in the next section.

Adding a Python-language hook

Adding a Python-language hook to your project takes three steps:

  • Add the hook as a Poetry development dependency.

  • Install the hook in the Nox session for pre-commit.

  • Add the hook to pre-commit-config.yaml.

For example, consider a linter named awesome-linter.

First, use Poetry to add the linter to your development dependencies:

poetry add -G dev awesome-linter

Next, update noxfile.py to add the linter to the pre-commit session:

@nox.session(name="pre-commit", ...)
def precommit(session: Session) -> None:
    ...
    session.install(
        "awesome-linter",  # Install awesome-linter
        "black",
        "darglint",
        ...
    )

Finally, add the hook to pre-commit-config.yaml as follows:

  • Locate the pre-commit-hooks.yaml file in the awesome-linter repository.

  • Copy the entry for the hook (not just the hook identifier).

  • Change language: from python to system.

  • Add the hook definition to the repo: local section.

Depending on the linter, the hook definition might look somewhat like the following:

repos:
  - repo: local
    hooks:
      # ...
      - id: awesome-linter
        name: Awesome Linter
        entry: awesome-linter
        language: system # was: python
        types: [python]

Running checks on modified files

pre-commit runs checks on the staged contents of files. Any local modifications are stashed for the duration of the checks. This is motivated by pre-commit’s primary use case, validating changes staged for a commit.

Requiring changes to be staged allows for a nice property: Many pre-commit hooks support fixing offending lines automatically, for example black, prettier, and isort. When this happens, your original changes are in the staging area, while the fixes are in the work tree. You can accept the fixes by staging them with git add before committing again.

If you want to run linters or formatters on modified files, and you do not want to stage the modifications just yet, you can also invoke the tools via Poetry instead. For example, use poetry run flake8 <file> to lint a modified file with Flake8.

Overview of pre-commit hooks

The SSB PyPI Template comes with a pre-commit configuration consisting of the following hooks:

pre-commit hooks

black

Run the Black code formatter

ruff

Run the Ruff linter

isort

Rewrite source code to sort Python imports

prettier

Run the Prettier code formatter

check-added-large-files

Prevent giant files from being committed

check-toml

Validate TOML files

check-yaml

Validate YAML files

end-of-file-fixer

Ensure files are terminated by a single newline

trailing-whitespace

Ensure lines do not contain trailing whitespace

The Black hook

Black is the uncompromising Python code formatter. One of its greatest features is its lack of configurability. Blackened code looks the same regardless of the project you’re reading.

The Prettier hook

Prettier is an opinionated code formatter for many languages, including YAML, Markdown, and JavaScript. Like Black, it has few options, and the SSB PyPI Template uses none of them.

The Ruff hook

Ruff is a fast linter framework for Python. For more details, see the section Linting with Flake8.

The isort hook

isort reorders imports in your Python code. Imports are separated into three sections, as recommended by PEP 8: standard library, third party, first party. There are two additional sections, one at the top for future imports, the other at the bottom for relative imports. Within each section, from imports follow normal imports. Imports are then sorted alphabetically.

The SSB PyPI Template activates the Black profile for compatibility with the Black code formatter. Furthermore, the force_single_line setting is enabled. This splits imports onto separate lines to avoid merge conflicts. Finally, two blank lines are enforced after imports for consistency, via the lines_after_imports setting.

The pyupgrade hook

pyupgrade upgrades your source code to newer versions of the Python language and standard library. The tool analyzes the abstract syntax tree of the modules in your project, replacing deprecated or legacy usages with modern idioms.

The minimum supported Python version is declared in the relevant section of .pre-commit-config.yaml. You should change this setting whenever you drop support for an old version of Python.

Hooks from pre-commit-hooks

The pre-commit configuration also includes several smaller hooks from the pre-commit-hooks repository.

Linting with Flake8

Flake8 is an extensible linter framework for Python, and a command-line utility to run the linters on your source code. The SSB PyPI Template integrates Flake8 via a pre-commit hook, see the section The Flake8 hook.

The configuration file for Flake8 and its extensions is named .flake8 and located in the project directory. For details about the configuration file, see the official reference.

The sections below describe the linters in more detail. Each section also notes any configuration settings applied by the SSB PyPI Template.

Overview of available plugins

Flake8 comes with a rich ecosystem of plugins. The following table lists the Flake8 plugins used by the SSB PyPI Template, and links to their lists of error codes.

Flake8 plugins

pyflakes

Find invalid Python code

F

pycodestyle

Enforce style conventions from PEP 8

E,W

pep8-naming

Enforce naming conventions from PEP 8

N

pydocstyle / flake8-docstrings

Enforce docstring conventions from PEP 257

D

mccabe

Limit the code complexity

C

darglint

Detect inaccurate docstrings

DAR

Bandit / flake8-bandit

Detect common security issues

S

pyflakes

pyflakes parses Python source files and finds invalid code. Warnings reported by this tool include syntax errors, undefined names, unused imports or variables, and more. It is included with Flake8 by default.

Error codes are prefixed by F for “flake”.

pycodestyle

pycodestyle checks your code against the style recommendations of PEP 8, the official Python style guide. The tool detects whitespace and indentation issues, deprecated features, bare excepts, and much more. It is included with Flake8 by default.

Error codes are prefixed by W for warnings and E for errors.

The SSB PyPI Template disables the following errors and warnings for compatibility with Black and flake8-bugbear:

  • E203 (whitespace before :)

  • E501 (line too long)

  • W503 (line break before binary operator)

pep8-naming

pep8-naming enforces the naming conventions from PEP 8. Examples are the use of camel case for the names of classes, the use of lowercase for the names of functions, arguments and variables, or the convention to name the first argument of methods self.

Error codes are prefixed by N for “naming”.

pydocstyle and flake8-docstrings

pydocstyle checks that docstrings comply with the recommendations of PEP 257 and a configurable style convention. It is integrated with Flake8 via the flake8-docstrings extension. Warnings range from missing docstrings to issues with whitespace, quoting, and docstring content.

Error codes are prefixed by D for “docstring”.

The SSB PyPI Template selects the recommendations of the Google styleguide. Here is an example of a function documented in Google style:

def add(first: int, second: int) -> int:
    """Add two integers.

    Args:
        first: The first argument.
        second: The second argument.

    Returns:
        The sum of the arguments.
    """

flake8-rst-docstrings

flake8-rst-docstrings validates docstring markup as reStructuredText. Docstrings must be valid reStructuredText because they are used by Sphinx to generate the API reference.

[Error codes][flake8-rst-docstrings codes] are prefixed by RST for “reStructuredText”, and group issues into numerical blocks, by their severity and origin.

flake8-bugbear

flake8-bugbear detects bugs and design problems. The warnings are more opinionated than those of pyflakes or pycodestyle. For example, the plugin detects Python 2 constructs which have been removed in Python 3, and likely bugs such as function arguments defaulting to empty lists or dictionaries.

[Error codes] are prefixed by B for “bugbear”.

The SSB PyPI Template also enables Bugbear’s B9 warnings, which are disabled by default. In particular, B950 checks the maximum line length like pycodestyle’s E501, but with a tolerance margin of 10%. This soft limit is set to 80 characters, which is the value used by the Black code formatter.

mccabe

mccabe checks the code complexity of your Python package against a configured limit. The tool is included with Flake8.

Error codes are prefixed by C for “complexity”.

The SSB PyPI Template limits code complexity to a value of 10.

darglint

darglint checks that docstring descriptions match function definitions. The tool has its own configuration file, named .darglint.

Error codes are prefixed by DAR for “darglint”.

The SSB PyPI Template allows one-line docstrings without function signatures. Multi-line docstrings must specify the function signatures completely and correctly, using Google docstring style.

Bandit

Bandit is a tool designed to find common security issues in Python code, and integrated via the flake8-bandit extension.

Error codes are prefixed by S for “security”. (The prefix B for “bandit” is used when Bandit is run as a stand-alone tool.)

The SSB PyPI Template disables S101 (use of assert) for the test suite, as pytest uses assertions to verify expectations in tests.

Type-checking with mypy

Note

Type annotations, first introduced in Python 3.5, are a way to annotate functions and variables with types. With appropriate tooling, they can make your programs easier to understand, debug, and maintain.

Type-checking refers to the practice of verifying the type correctness of a program, using type annotations and type inference. There are two kinds of type checkers:

  • Static type checkers verify the type correctness of your program without executing it, using static analysis.

  • Runtime type checkers find type errors by instrumenting your code to type-check arguments and return values in function calls. This is particularly useful during the execution of unit tests.

There is also an increasing number of libraries that leverage type annotations at runtime. For example, you can use type annotations to generate serialization schemas or command-line parsers.

mypy is the pioneer and de facto reference implementation of static type checking in Python. Invoke mypy via Nox, as explained in the section The mypy session.

mypy is configured in the pyproject.toml file, using the tool.mypy table. For details about supported configuration options, see the official reference.

The SSB PyPI Template enables several configuration options which are off by default. The following options are enabled for strictness and enhanced output:

External services

Your GitHub repository can be integrated with several external services for continuous integration and delivery. This section describes these external services, what they do, and how to set them up for your repository.

PyPI

PyPI is the official Python Package Index. Uploading your package to PyPI allows others to download and install it to their system.

Follow these steps to set up PyPI for your repository:

  1. Sign up at PyPI.

  2. Go to the Account Settings on PyPI, generate an API token, and copy it.

  3. Go to the repository settings on GitHub, and add a secret named PYPI_TOKEN with the token you just copied.

PyPI is integrated with your repository via the Release workflow.

TestPyPI

TestPyPI is a test instance of the Python package registry. It allows you to check your release before uploading it to the real index.

Follow these steps to set up TestPyPI for your repository:

  1. Sign up at TestPyPI.

  2. Go to the Account Settings on TestPyPI, generate an API token, and copy it.

  3. Go to the repository settings on GitHub, and add a secret named TEST_PYPI_TOKEN with the token you just copied.

TestPyPI is integrated with your repository via the Release workflow.

SonarCloud

SonarCloud is a reporting service for code quality and code coverage.

Follow these steps to set up SonarCloud for your repository:

  1. Sign up at [SonarClod] with your GitHub account.

  2. If you don’t have an organization in SonarCloud yet, create one.

    1. Click the plus-sign at upper right and select Create new organization.

    2. If you have a GitHub organization, import it. Otherwise, create one manually.

    3. Important: Set the key-field equal to your GitHub username. The name-field can be whatever you like.

  3. Click the plus-sign at upper right and select Analyze new project, select your organization and the new repo to analyze, and then click the Set Up button.

  4. Set new code to be based on Number of days and 60 days (suggestion). And then click the Create project button.

  5. Select Administration, Analysis Method and choose method: With GitHub Actions.

  6. Follow the description to add a GitHub repository secret for the SONAR_TOKEN.

  7. That’s it. The next time a pull request is opened or a branch or merged to main on GitHub, the code will be analysed by SonarCloud.

The configuration is included in the repository, in the file sonar-project.properties.

The Tests workflow uploads the coverage data.

Dependabot

Dependabot creates pull requests with automated dependency updates.

Please refer to the official documentation for more details.

The configuration is included in the repository, in the file .github/dependabot.yml.

It manages the following dependencies:

Type of dependency

Managed files

See also

Python

poetry.lock

Managing dependencies

Python

docs/requirements.txt

Read the Docs

Python

.github/workflows/constraints.txt

Constraints file

GitHub Action

.github/workflows/*.yml

GitHub Actions workflows

Read the Docs

Read the Docs automates the building, versioning, and hosting of documentation.

Follow these steps to set up Read the Docs for your repository:

  1. Sign up at Read the Docs.

  2. Import your GitHub repository, using the button Import a Project.

  3. Install the GitHub webhook, using the button Add integration on the Integrations tab in the Admin section of your project on Read the Docs.

Read the Docs automatically starts building your documentation, and will continue to do so when you push to the default branch or make a release. Your documentation now has a public URL like this:

https://<project>.readthedocs.io/

The configuration for Read the Docs is included in the repository, in the file .readthedocs.yml. The SSB PyPI Template configures Read the Docs to build and install the package with Poetry, using a so-called PEP 517-build.

Build dependencies for the documentation are installed using a requirements file located at docs/requirements.txt. Read the Docs currently does not support installing development dependencies using Poetry’s lock file. For the sake of brevity and maintainability, only direct dependencies are included.

Note

The requirements file is managed by Dependabot. When newer versions of the build dependencies become available, Dependabot updates the requirements file and submits a pull request. When adding or removing Sphinx extensions using Poetry, don’t forget to update the requirements file as well.

GitHub Actions workflows

The SSB PyPI Template uses GitHub Actions to implement continuous integration and delivery. With GitHub Actions, you define so-called workflows using YAML files located in the .github/workflows directory.

A workflow is an automated process consisting of one or many jobs, each of which executes a series of steps. Workflows are triggered by events, for example when a commit is pushed or when a release is published. You can learn more about the workflow language and its supported keywords in the official reference.

Note

Real-time logs for workflow runs are available from the Actions tab in your GitHub repository.

Overview of workflows

The SSB PyPI Template defines the following workflows:

GitHub Actions workflows

Workflow

File

Description

Trigger

Tests

tests.yml

Run the test suite with Nox

Push, PR

Release

release.yml

Upload the package to PyPI

Push (default branch)

Labeler

labeler.yml

Manage GitHub project labels

Push (default branch)

Overview of GitHub Actions

Workflows use the following GitHub Actions:

GitHub Actions

actions/cache

Cache dependencies and build outputs

actions/checkout

Check out the Git repository

actions/download-artifact

Download artifacts from workflows

actions/setup-python

Set up workflows with a specific Python version

actions/upload-artifact

Upload artifacts from workflows

sonarsource/sonarcloud-github-action

Upload coverage to SonarCloud

crazy-max/ghaction-github-labeler

Manage labels on GitHub as code

pypa/gh-action-pypi-publish

Upload packages to PyPI and TestPyPI

release-drafter/release-drafter

Draft and publish GitHub Releases

salsify/action-detect-and-tag-new-version

Detect and tag new versions in a repository

Note

GitHub Actions used by the workflows are managed by Dependabot. When newer versions of GitHub Actions become available, Dependabot updates the workflows that use them and submits a pull request.

Constraints file

GitHub Actions workflows install the following tools:

These dependencies are pinned using a constraints file located in .github/workflow/constraints.txt.

Note

The constraints file is managed by Dependabot. When newer versions of the tools become available, Dependabot updates the constraints file and submits a pull request.

The Tests workflow

The Tests workflow runs checks using Nox. It is triggered on every push to the repository, and when a pull request is opened or receives new commits.

Each Nox session runs in a separate job, using the current release of Python and the latest Ubuntu runner. Selected Nox sessions also run on Windows and macOS, and with older Python versions, as shown in the table below:

Jobs in the Tests workflow

Nox session

Platform

Python versions

pre-commit

Ubuntu

3.10

mypy

Ubuntu

3.10, 3.11, 3.12

tests

Ubuntu

3.10, 3.11, 3.12

tests

Windows

3.12

tests

macOS

3.12

coverage

Ubuntu

3.12

typeguard

Ubuntu

3.10

xdoctest

Ubuntu

3.10

docs-build

Ubuntu

3.10

The workflow uploads the generated documentation as a workflow artifact. Building the documentation only serves the purpose of catching issues in pull requests. Builds on Read the Docs happen independently.

The workflow also uploads coverage data to SonarCloud after running tests. It generates a coverage report in Cobertura XML format, using the coverage session. The report is uploaded using the official SonarSource GitHub Action.

The Tests workflow uses the following GitHub Actions:

The Tests workflow is defined in .github/workflows/tests.yml.

The Release workflow

The Release workflow publishes your package on PyPI, the Python Package Index. The workflow also creates a version tag in the GitHub repository, and publishes a GitHub Release using Release Drafter. The workflow is triggered on every push to the default branch.

Release steps only run if the package version was bumped. If the package version did not change, the package is instead uploaded to TestPyPI as a prerelease, and only a draft GitHub Release is created. TestPyPI is a test instance of the Python Package Index.

The Release workflow uses API tokens to access PyPI and TestPyPI. You can generate these tokens from your account settings on these services. The tokens need to be stored as secrets in the repository settings on GitHub:

Secrets

PYPI_TOKEN

PyPI API token

TEST_PYPI_TOKEN

TestPyPI API token

The Release workflow uses the following GitHub Actions:

Release notes are populated with the titles and authors of merged pull requests. You can group the pull requests into separate sections by applying labels to them, like this:

Pull Request Label

Section in Release Notes

breaking

💥 Breaking Changes

enhancement

🚀 Features

removal

🔥 Removals and Deprecations

bug

🐞 Fixes

performance

🐎 Performance

testing

🚨 Testing

ci

👷 Continuous Integration

documentation

📚 Documentation

refactoring

🔨 Refactoring

style

💄 Style

dependencies

📦 Dependencies

The workflow is defined in .github/workflows/release.yml. The Release Drafter configuration is located in .github/release-drafter.yml.

The Labeler workflow

The Labeler workflow manages the labels used in GitHub issues and pull requests based on a description file .github/labels.yaml. In this file each label is described with a name, a description and a color. The workflow is triggered on every push to the default branch.

The workflow creates or updates project labels if they are missing or different compared to the labels.yml file content.

The workflow does not delete labels already configured in the GitHub UI and not in the labels.yml file. You can change this behavior and add ignore patterns in the settings of the workflow (see GitHub Labeler documentation).

The Labeler workflow uses the following GitHub Actions:

The workflow is defined in .github/workflows/labeler.yml. The GitHub Labeler configuration is located in .github/labels.yml.

Tutorials

First, make sure you have all the requirements installed.

How to test your project

Run the test suite using Nox:

nox -r

How to run your code

First, install the project and its dependencies to the Poetry environment:

poetry install

Run an interactive session in the environment:

poetry run python

Invoke the command-line interface of your package:

poetry run <project>

How to make code changes

  1. Run the tests, as explained above.
    All tests should pass.

  2. Add a failing test under the tests directory.
    Run the tests again to verify that your test fails.

  3. Make your changes to the package, under the src directory.
    Run the tests to verify that all tests pass again.

How to push code changes

Create a branch for your changes:

git switch --create my-topic-branch main

Create a series of small, single-purpose commits:

git add <files>
git commit

Push your branch to GitHub:

git push --set-upstream origin my-topic-branch

The push triggers the following automated steps:

How to open a pull request

Open a pull request for your branch on GitHub:

  1. Select your branch from the Branch menu.

  2. Click New pull request.

  3. Enter the title for the pull request.

  4. Enter a description for the pull request.

  5. Apply a label identifying the type of change

  6. Click Create pull request.

Release notes are pre-filled with the titles of merged pull requests.

How to accept a pull request

If all checks are marked as passed, merge the pull request using the squash-merge strategy (recommended):

  1. Click Squash and Merge. (Select this option from the dropdown menu of the merge button, if it is not shown.)

  2. Click Confirm squash and merge.

  3. Click Delete branch.

This triggers the following automated steps:

In your local repository, update the main branch:

git switch main
git pull origin main

Optionally, remove the merged topic branch from the local repository as well:

git remote prune origin
git branch --delete --force my-topic-branch

The original commits remain accessible from the pull request (Commits tab).

How to make a release

Releases are triggered by a version bump on the default branch. It is recommended to do this in a separate pull request:

  1. Switch to a branch.

  2. Bump the version using poetry version.

  3. Commit and push to GitHub.

  4. Open a pull request.

  5. Merge the pull request.

The individual steps for bumping the version are:

git switch --create release main
poetry version <version>
git commit --message="<project> <version>" pyproject.toml
git push origin release

If you’re not sure which version number to choose, read about Semantic Versioning. Versioning rules for Python packages are laid down in PEP 440.

Before merging the pull request for the release, go through the following checklist:

  • The pull request passes all checks.

  • The development release on TestPyPI looks good.

  • All pull requests for the release have been merged.

Merging the pull request triggers the Release workflow. This workflow performs the following automated steps:

  • Publish the package on PyPI.

  • Publish a GitHub Release.

  • Apply a Git tag to the repository.

Read the Docs automatically builds a new stable version of the documentation.

The Hypermodern Python blog

The project setup is described in detail in the Hypermodern Python article series:

You can also read the articles on this blog.